RAID

Share

RAID

RAID TRY REBREATHER DIVE…

Your introduction into the Rebreather World with an underwater experience. The try Rebreather Dive experience will open the door to a bubble free and sound exhilaration, where you will meet other people who share your interest for unending, exciting adventures and new technologies. This introduction is designed to exhibit the technology and ease of Rebreather diving, in a pool or in confined water environment with pool like conditions, with a maximum depth of 5 m/16.5 ft…

RAIDREBREATHER LEVEL 1…

Your Entry into the Marine World – Enjoy a Bubble Free Environment. As a RAID Diver you will savour every moment of weightless exhilaration, where you will meet other adventurers who share your quest for unending excitement, meet new people and have a great time. The core rebreather course is designed to train people with either no diving experience or train Open Circuit divers with no rebreather skills in the safe use and technology of basic Rebreather diving with no decompression, up to 1.2 PpO2 and to a maximum depth of 20 metres/66 feet; Combined with this course you will be required to complete a detailed rebreather Speciality unit specific programme. If are not sure which rebreather you wish to learn on contact your RAID Dive Centre to discuss this aspect. NOTE: Persons new to diving – this Level provides you with the certification to be able to diveOpen Circuit& a RAID rebreather in a safe and concise way and earning you two certifications! This means you have to complete Rebreather Level 1 And the unit specific rebreather speciality you have chosen to do this course with. This Level may only be taught in combination with the Poseidon Mk6 Discovery Speciality. No other rebreather Speciality qualifies for this level…

 

REBREATHER LEVEL 2…

Fun Educational Dives in the World of Adventure. This core rebreatherprogramme will improve your dive skills and build your knowledge. This exciting development course is designed to train students in the safe use and technology of Rebreather divingwithno decompression, up to 1.2 PpO2 and to a maximum depth of 30 metres/99 feet….

 

 

REBREATHER LEVEL 3…

This core level 3 rebreatherrescueprogramme is an important and crucial step in expanding your knowledge and experience beyond a purely recreational level. This training programme is a prerequisite for all leadership training (Level 4 dive master and instructors). This course is demanding and realistic in its conduct, content and approach. Interaction discussion, variety and flexibility are stressed during skills training. This unique course builds confidence and ability, providing the skills and knowledge to help you better understand how to respond safely and efficiently to surface and underwater emergencies. This course is designed to train students in the safe use and technology of rebreather diving with no decompression, up to 1.2 PpO2 and to a maximum depth of 40 metres/132 feet…

 

POSEIDON MK6 DISCOVERY REBREATHER SPECIALTY…

The Poseidon Mk6 Discovery is designed for the sport recreational market. The unit design is a fully automatic closed circuit electronic system requiring no user input underwater and with the concept that if there is a problem the diver switches over to open circuit and ascends. This unit is targeted for the recreational market, so that many more divers may have the benefits of closed circuit diving without the seriously long and complicated training that is generally required for other systems. The unit features some innovated designs that are new to the closed circuitrebreatherindustry which provides unique safety aspects. It is a rebreather for the recreational diver, with an inbuilt depth limitation to 40 metres / 132 feet…

 

DSAT / PADI TecRec Technical Dive Courses Overview:

 

PADI DISCOVER TEC DIVING EXPERIENCE…
DSAT Discover Tec lets you try technical diving equipment and procedures.

What You’ll Learn! You learn about technical diving and get to try it out. Plus, Discover Tec experiences can also credit towards the Tec 40 course…

 

PADI TEC 40 COURSE…

If you’re interested in technical diving, but haven’t yet met the prerequisites for the PADI Tec 50 Diver course or PADI Tec 45 course, you can consider enrolling in the PADI Tec 40 course. It is the first subdivision of the full PADI Tec Deep Diver course and consists of the first four dives. Because you can do one of these dives in confined water (such as a swimming pool), many divers start the Tec 40 courses in the winter months, ready to continue in open water when spring arrives.

You’ll learn to! Use decompression software and dive computers to plan and make decompression dives with no more than 10 minutes of total decompression and not deeper than 40 metres/130 feet. Use a single cylinder of decompression gas with up to 50 percent oxygen (EANx50) to add conservatism to the required decompression. Since it’s part of the course, your PADI Tec 40 course training credits toward the PADI Tec 45 and Tec 50 courses…

 

PADI TEC 45 COURSE…

The Tec 45 course picks up where Tec 40 leaves off and takes your training as a tec diver further and deeper. It is the second subcourse in the full PADI Tec Diver course.

What You Learn! The skills and equipment and planning need to dive to a maximum of 45 metres/145 feet. The knowledge to plan and execute single and repetitive decompression dives using a single stage cylinder of EANx or oxygen to accelerate or add conservatism to the decompression stops. There would be no time limit to amount of decompression Prepare for and respond to foreseeable technical diving emergencies Master the basic skills and procedures you’ll need as you move into deeper technical diving…

 

PADI TEC 50 COURSE…

The Tec 50 course completes your training as an entry-level tec diver, taking you past the limits of recreational diving.

What You’ll Learn! During the Tec 50 course, you

• Make actual decompression dives as deep as 50 metres/165 feet
• Use enriched air nitrox and/or oxygen for decompression
• Use desk top decompression software to create custom dive tables and plan your dives
• Qualify to make technical decompression dives independently

 

PADI TEC TRIMIX 65 COURSE…

This course opens up the advantages of trimix to the diver, and divers are qualified to make multi-stop decompression dives that employ EANx and oxygen for accelerated decompression, and any trimix with an oxygen content of 18% or more. They can dive to a maximum depth of 65 metres/210 feet.

What You’ll Learn! The PADI Tec Trimix 65 course is intended to extend the depth range of technical divers already trained and qualified to use air,enriched air and oxygen for technical decompression dives beyond 50 metres /165 feet. This course is for Tec 50 divers (or those holding a qualifying certification from another training organization). The course extends your depth range capabilities by training you to use trimix (a blend of helium,oxygen and nitrogen). You will:

• Plan and execute at least five trimixdecompression dives using various trimix blends
• Use decompression software to create custom dive tables and dive plans
• Make training dives as deep as 65 metres/210 feet

PADI TEC TRIMIX DIVER COURSE…

For the extreme diver ready to further explore the world of technical deep diving, the gas of choice is trimix – a blend of oxygen,helium and nitrogen. The PADI Tec Trimix Diver course takes you to the outer edges of technical deep diving, opening the door to pristine dive sites few divers – if any – ever see.

What You Learn! The PADI Tec Trimix Diver course is intended to extend the depth range of technical divers already trained and qualified to use air,enriched air and oxygen for technical decompression dives beyond 50 metres/165 feet. Diving with trimix is the outer edge of tec diving – the maximum depth for using this technology has yet to be defined. This course is for Tec 50 or Tec Trimix 65 (or those holding a qualifying certification from another training organization). The course extends your depth range capabilities by training you to use trimix (a blend of helium,oxygen and nitrogen). You will:

• Plan and execute at least five trimixdecompression dives using various trimix blends
• Use decompression software to create custom dive tables and dive plans
• Make training dives as deep as 75 metres/245 feet

PADI GAS BLENDER COURSE…

More people are diving with enriched air and trimix and this means the demand for enriched air and trimix fills is also increasing. However, there needs to be someone qualified to administer these fills to meet this demand. This is where the PADI Gas Blender course comes in. It can result in one of two certifications: PADI Gas Blender or PADI Trimix Blender.

What You’ll Learn! The Gas Blender course will train you as a qualified gas blender, allowing you to provide gas mixes to appropriately certified consumers. You’ll learn the physical properties of oxygen, its associated hazards, handling requirements and what cleaning equipment is necessary. Finally, you will learn the five methods of obtaining the desired enriched air nitrox mix and the various methods used to obtain proper helium mixes…

Facebook Iconfacebook like buttonSubscribe to our rss feeds